Category Archives: Mobile Networks

Diameter Routing Agents (DRA)

EPC, LTE, Mobile Networks, SDM,

Diameter is used extensively in 3GPP networks (Especially LTE) to provide the AAA services.

The Diameter protocol is great, and I’ve sung it’s praises before, but one issue operators start to face is that there are a lot of diameter peers, each of which needs a connection to other diameter peers.

https://en.wikipedia.org/wiki/IP_Multimedia_Subsystem#/media/File:Ims_overview.png

This diagram is an “Overview” showing one of each network element – In reality almost all network elements will exist more than once for redundancy and scalability.

What you start to end up with is a rats nest of connections, lines drawn everywhere and lots of manual work and room for human error when it comes to setting up the Diameter Peer relationships.

Let’s say you’ve got 5x MME, 5x PCRF, 2x HSS, 5x S-SCSF and 5x Packet Gateways, each needing Diameter peer relationships setup, it starts to get really messy really quickly.

Enter the Diameter Routing Agent – DRA.

Now each device only needs a connection to the DRA, which in turn has a connection to each Diameter peer. Adding a new MME doesn’t mean you need to reconfigure your HSS, just connect the MME to the DRA and away you go.

I’ll cover using Kamailio to act as a Diameter routing agent in a future post.

PyHSS – Python 3GPP LTE Home Subscriber Server

EPC, EUTRAN, IMS / VoLTE, LTE, Mobile Networks, Python, RF, RFCs & Standards, SDM, , ,

I recently started working on an issue that I’d seen was to do with the HSS response to the MME on an Update Location Answer.

I took some Wireshark traces of a connection from the MME to the HSS, and compared that to a trace from a different HSS. (Amarisoft EPC/HSS)

The Update Location Answer sent by the Amarisoft HSS to the MME over the S6a (Diameter) interface includes an AVP for “Multiple APN Configuration” which has the the dedicated bearer for IMS, while the HSS in the software I was working on didn’t.

After a bit of bashing trying to modify the S6a responses, I decided I’d just implement my own Home Subscriber Server.

The Diameter interface is pretty straight forward to understand, using a similar structure to RADIUS, and with the exception of the Crypto for the EUTRAN Authentication Vectors, it was all pretty straight forward.

If you’d like to know more you can download PyHSS from my GitLab page, and view my Diameter Primer post and my post on Diameter packet structure.

Diameter Packet Structure

EPC, EUTRAN, LTE, RF, RFCs & Standards, VoIP,

We talked a little about what the Diameter protocol is, and how it’s used, now let’s look at the packets themselves.

Each Diameter packet has at a the following headers:

Version

This 1 byte field is always (as of 2019) 0x01 (1)

Length

3 bytes containing the total length of the Diameter packet and all it’s contained AVPs.

This allows the receiver to know when the packet has ended, by reading the length and it’s received bytes so far it can know when that packet ends.

Flags

Flags allow particular parameters to be set, defining some possible options for how the packet is to be handled by setting one of the 8 bits in the flags byte, for example Request Set, Proxyable, Error, Potentially Re-transmitted Message,

Command Code

Each Diameter packet has a 3 byte command code, that defines the method of the request,

The IETF have defined the basic command codes in the Diameter Base Protocol RFC, but many vendors have defined their own command codes, and users are free to create and define their own, and even register them for public use.

3GPP have defined a series of their own command codes.

Application ID

To allow vendors to define their own command codes, each command code is also accompanied by the Application ID, for example the command code 257 in the base Diameter protocol translates to Capabilities Exchange Request, used to specify the capabilities of each Diameter peer, but 257 is only a Capabilities Exchange Request if the Application ID is set to 0 (Diameter Base Protocol).

If we start developing our own applications, we would start with getting an Application ID, and then could define our own command codes. So 257 with Application ID 0 is Capabilities Exchange Request, but command code 257 with Application ID 1234 could be a totally different request.

Hop-By-Hop Identifier

The Hop By Hop identifier is a unique identifier that helps stateful Diameter proxies route messages to and fro. A Diameter proxy would record the source address and Hop-by-Hop Identifier of a received packet, replace the Hop by Hop Identifier with a new one it assigns and record that with the original Hop by Hop Identifier, original source and new Hop by Hop Identifier.

End-to-End Identifier

Unlike the Hop-by-Hop identifier the End to End Identifier does not change, and must not be modified, it’s used to detect duplicates of messages along with the Origin-Host AVP.

AVPs

The real power of Diameter comes from AVPs, the base protocol defines how to structure a Diameter packet, but can’t convey any specific data or requests, we put these inside our Attribute Value Pairs.

Let’s take a look at a simple Diameter request, it’s got all the boilerplate headers we talked about, and contains an AVP with the username.

Here we can see we’ve got an AVP with AVP Code 1, containing a username

Let’s break this down a bit more.

AVP Codes are very similar to the Diameter Command Codes/ApplicationIDs we just talked about.

Combined with an AVP Vendor ID they define the information type of the AVP, some examples would be Username, Session-ID, Destination Realm, Authentication-Info, Result Code, etc.

AVP Flags are again like the Diameter Flags, and are made up a series of bits, denoting if a parameter is set or not, at this stage only the first two bits are used, the first is Vendor Specific which defines if the AVP Code is specific to an AVP Vendor ID, and the second is Mandatory which specifies the receiver must be able to interpret this AVP or reject the entire Diameter request.

AVP Length defines the length of the AVP, like the Diameter length field this is used to delineate the end of one AVP.

AVP Vendor ID

If the AVP Vendor Specific flag is set this optional field specifies the vendor ID of the AVP Code used.

AVP Data

The payload containing the actual AVP data, this could be a username, in this example, a session ID, a domain, or any other value the vendor defines.

AVP Padding

AVPs have to fit on a multiple of a 32 bit boundary, so padding bits are added to the end of a packet if required to total the next 32 bit boundary.

Diameter Basics

EPC, EUTRAN, LTE, Mobile Networks, RF, RFCs & Standards, SDM, VoIP,

3GPP selected Diameter protocol to take care of Authentication, Authorization, and Accounting (AAA).

It’s typically used to authenticate users on a network, authorize them to use services they’re allowed to use and account for how much of the services they used.

In a EPC scenario the Authentication function takes the form verifying the subscriber is valid and knows the K & OP/OPc keys for their specific IMSI.

The Authorization function checks to find out which features, APNs, QCI values and services the subscriber is allowed to use.

The Accounting function records session usage of a subscriber, for example how many sessional units of talk time, Mb of data transferred, etc.

Diameter Packets are pretty simple in structure, there’s the packet itself, containing the basic information in the headers you’d expect, and then a series of one or more Attribute Value Pairs or “AVPs”.

These AVPs are exactly as they sound, there’s an attribute name, for example username, and a value, for example, “Nick”.

This could just as easily be for ordering food; we could send a Diameter packet with an imaginary command code for Food Order Request, containing a series of AVPs containing what we want. The AVPs could belike Food: Hawian Pizza, Food: Garlic Bread, Drink: Milkshake, Address: MyHouse.
The Diameter server could then verify we’re allowed to order this food (Authorization) and charge us for the food (Accounting), and send back a Food Order Response containing a series of AVPs such as Delivery Time: 30 minutes, Price: $30.00, etc.

Diameter packets generally take the form of a request – response, for example a Capabilities Exchange Request contains a series of AVPs denoting the features supported by the requester, which is sent to a Diameter peer. The Diameter peer then sends back a Capabilities Exchange Response, containing a series of AVPs denoting the features that it supports.

Diameter is designed to be extensible, allowing vendors to define their own type of AVP and Diameter requests/responses and 3GPP have defined their own types of messages (Diameter Command Codes) and types of data to be transferred (AVP Codes).

LTE/EPC relies on Diameter and the 3GPP/ETSI defined AVP / Diameter Packet requests/responses to form the S6a Interface between an MME and a HSS, the Gx Interface between the PCEF and the PCRF, Cx Interface between the HSS and the CSCF, and many more interfaces used for Authentication in 3GPP networks.

Qos in LTE (4G) – ARP

EPC, EUTRAN, LTE, Mobile Networks, RF, , , , , , , ,

ARP in LTE is not the Ethernet standard for address resolution, but rather the Allocation and Retention Policy.

A scenario may arise where on a congested cell another bearer is requested to be setup.

The P-GW, S-GW or eNB have to make a decision to either drop an existing bearer, or to refuse the request to setup a new bearer.

The ARP value is used to determine the priority of the bearer to be established compared to others,

For example a call to an emergency services number on a congested cell should drop any other bearers so the call can be made, thus the request for bearer for the VoLTE call would have a higher ARP value than the other bearers and the P-GW, S-GW or eNB would drop an existing bearer with a lower ARP value to accommodate the new bearer with a higher ARP value.

ARP is only used when setting up a new bearer, not to determine how much priority is given to that bearer once it’s established (that’s defined by the QCI).

QoS in LTE (4G) – MBR/AMBR/APN-MBR

EPC, EUTRAN, LTE, Mobile Networks, RF, , , , , , , ,

MBR stands for Maximum Bit Rate, and it defines the maximum rate traffic can flow between a UE and the network.

It can be defined on several levels:

MBR per Bearer

This is the maximum bit rate per bearer, this rate can be exceeded but if it is exceeded it’s QoS (QCI) values for the traffic peaking higher than the MBR is back to best-effort.

AMBR

Aggregate Maximum Bit Rate – Maximum bit rate of all Service Data Flows / Bearers to and from the network from a single UE.

APN-MBR

The APN-MBR allows the operator to set a maximum bit rate per APN, for example an operator may choose to limit the MBR for subscriber on an APN for a MVNO to give it’s direct customers a higher speed.

(This is only applied to Non-GBR bearers)

QoS in LTE (4G) – QCI

EPC, EUTRAN, LTE, Mobile Networks, RF, , , , , , ,

The QCI (Quality Class Indicator) is a value of 0-9 to denote the service type and the maximum delays, packet loss and throughput the service requires.

Different data flows have different service requirements, let’s look at some examples:

A VoLTE call requires low latency and low packet loss, without low latency it’ll be impossible to hold a conversation with long delays, and with high packet loss you won’t be able to hear each other.

On the other hand a HTTP (Web) browsing session will be impervious to high latency or packet loss – the only perceived change would be slightly longer page load times as lost packets are resent and added delay on load of a few hundred ms.

So now we understand the different requirements of data flows, let’s look at the columns in the table above so we can understand what they actually signify:

GBR

Guaranteed Bit Rate bearers means our eNB will reserve resource blocks to carry this data no matter what, it’ll have those resource blocks ready to transport this data.

Even if the data’s not flowing a GBR means the resources are reserved even if nothing is going through them.

This means those resource blocks can’t be shared by other users on the network. The Uu interface in the E-UTRAN is shared between UEs in time and frequency, but with GBR bearers parts of this can be reserved exclusively for use by that traffic.

Non-GBR

With a Non-GBR bearer this means there is no guaranteed bit rate, and it’s just best effort.

Non-GBR traffic is scheduled onto resource blocks when they’re not in use by other non-GBR traffic or by GBR traffic.

Priority

The priory value is used for preemption by the PCRF.

The lower the value the more quickly it’ll be processed and scheduled onto the Uu interface.

Packet Delay Budget

Maximum allowable packet delay as measured from P-GW to UE.

Most of the budget relates to the over-the-air scheduling delays.

The eNB uses the QCI information to make its scheduling decisions and packet prioritisation to ensure that the QoS requirements are met on a per-EPS-bearer basis.

(20ms is typically subtracted from this value to account for the radio propagation delay on the Uu interface)

Packet Error Loss Rate (PELR)

This is packets lost on the Uu interface, that have been sent but not confirmed received.

The PELR is an upper boundary for how high this can go, based on the SDUs (IP Packets) that have been processed by the sender on RLC but not delivered up to the next layers (PDCP) by the receiver.

(Any traffic bursting above the GBR is not counted toward the PELR)

(The list is now larger than 0-9 with 3GPP adding extra QCI values for MCPTT, V2X, etc, the full list is available here in table 6.1.7A)

QoS in LTE (4G) – GBR & Non-GBR Bearers

EPC, EUTRAN, LTE, Mobile Networks, RF, , , , , , , , ,

GBR is a confusing concept at the start when looking at LTE but it’s actually kind of simple when we break it down.

GBR stands for Guaranteed Bit Rate, meaning the UE is guaranteed a set bit rate for the bearer.

The default bearer is always a non-GBR bearer, with best effort data rates.

Let’s look at non-GBR bearers to understand the need for GBR bearers:

As the Uu (Air) interface is shared between many UEs, each is able to transfer data. Let’s take an example of a cell with two UEs in it and not much bandwidth available.

If UE1 and UE2 are both sending the same amount of data it’ll be evenly split between the two.

But if UE1 starts sending a huge amount of data (high bit rate) this will impact on the other UEs in the cells ability to send data over the air as it’s a shared resource.

So if UE2 needs to send a stream of small but important data over the air interface, while UE2 is sending huge amounts of data, we’d have a problem.

To address this we introduce the concept of a Guaranteed Bit Rate. We tell the eNB that the bearer carrying UE2’s small but important data needs a Guaranteed Bit Rate and it reserves blocks on the air interface for UE2’s data.

So now we’ve seen the need for GBR there’s the counter point – the cost.

While UE1 can still continue sending but the eNB will schedule fewer resource blocks to it as it’s reserved some for UE2’s data flow.

If we introduced more and more UEs each requiring GBR bearers, eventually our non-GBR traffic would simply not get through, so GBR bearers have to be used sparingly.

Note: IP data isn’t like frame relay or circuit switched data that’s consistent, bit rate can spike and drop away all the time. GBR guarantees a minimum bit rate, which is generally tuned to the requirements of the data flow. For example a GBR for a Voice over IP call would reserve enough for the media (RTP stream) but no more, so as not to use up resources it doesn’t need.

RF Planning with Forsk Atoll - Importing environmental data

Forsk Atoll – WMS Map Tiles

EUTRAN, LTE, RF, Software, ,

A hack I found useful to add Google Maps / Google Satelite View / Bing Maps / Bing Arial / Open Street Maps in Forsk Atoll.

Close Atoll,

Go to C -> Program Files -> Atoll

Edit the file named atoll.ini

Paste the following into it:

[OnlineMaps]
Name1 = OpenStreetMap Standard Map
URL1 = http://a.tile.openstreetmap.org/%z/%x/%y.png
Name2 = MapQuest Open Aerial
URL2 = http://otile1.mqcdn.com/tiles/1.0.0/sat/%z/%x/%y.jpg
Name3 = 2Gis
URL3 = http://static.maps.api.2gis.ru/1.0?c...z&size=256,256
Name4 = 2Gis without logo
URL4 = http://tile2.maps.2gis.com/tiles?x=%x&y=%y&z=%z&v=37 
Name5 = Bing Aerial
URL5 = http://ecn.t3.tiles.virtualearth.net.../a%q.jpg?g=392
Name6 = Bing Hybrid
URL6 = http://ecn.t3.tiles.virtualearth.net.../h%q.jpg?g=392
Name7 = Bing Road
URL7 = http://ecn.t3.tiles.virtualearth.net.../r%q.jpg?g=392
Name8 = Yandex Road
URL8 = http://static-maps.yandex.ru/1.x/?ll...=%z&l=map&key=
Name9 = Yandex Aerial
URL9 = http://static-maps.yandex.ru/1.x/?ll...=%z&l=sat&key=
Name10 = Yandex Hybrid
URL10 = http://static-maps.yandex.ru/1.x/?ll...l=sat,skl&key=
Name11 = ArcGIS
URL11 = http://services.arcgisonline.com/Arc...e/%z/%y/%x.png
Name12 = opencyclemap
URL12 = http://tile.opencyclemap.org/cycle/%z/%x/%y.png
Name13 = Google Terrain
URL13 = http://mt.google.com/vt/lyrs=t&hl=en&x=%x&y=%y&z=%z
Name14 = Google Map
URL14 = http://mt.google.com/vt/lyrs=m&hl=en&x=%x&y=%y&z=%z
Name15 = Google Hybrid (Map + Terrain)
URL15 = http://mt.google.com/vt/lyrs=p&hl=en&x=%x&y=%y&z=%z
Name16 = Google Hybrid (Map + Satellite)
URL16 = http://mt.google.com/vt/lyrs=y&hl=en&x=%x&y=%y&z=%z
Name17 = Google Satellite
URL17 = http://mt.google.com/vt/lyrs=m&hl=en&x=%x&y=%y&z=%z
Name18 = Google Scheme
URL18 = http://mt.google.com/vt/lyrs=h&hl=en&x=%x&y=%y&z=%z
Name19 = Google Scheme2 
URL19 = http://mt.google.com/vt/lyrs=r&hl=en&x=%x&y=%y&z=%z

Save and open Atoll,

Open the Geo Tab,

Right click on Online Maps, click “New”

Select the map source (In this example I’m using OSM) & hit Ok.

Enable the Online Map layer by ticking the layer.

Bam, done.

RF Planning with Forsk Atoll - Laying out environmental data

LTE (4G) – TMSI & GUTI

EPC, EUTRAN, LTE, Mobile Networks, Notes, RF, SDM, , , ,

We’ve already touched on how subscribers are authenticated to the network, how the network is authenticated to subscribers and how the key hierarchy works for encryption of user data and control plane data.

If the IMSI was broadcast in the clear over the air, anyone listening would have the unique identifier of the subscriber nearby and be able to track their movements.

We want to limit the use of the IMSI over the air to a minimum.

During the first exchange the terminal is forced to send it’s IMSI, it’s the only way we can go about authenticating to the network, but once the terminal is authenticated and encryption of the radio link has been established, the network allocates a temporary identifier to the terminal, called the Temporary Mobile Subscriber Identity (TMSI) by the serving MME.

The TMSI is given to the terminal once encryption is setup, so only the network and the terminal know the mapping between IMSI and TMSI.

The TMSI is used for all future communication between the Network and the Terminal, hiding the IMSI.

The TMSI can be updated / changed at regular intervals to ensure the IMSI-TMSI mapping cannot be ascertained by a process of elimination.

The TMSI is short – only 4 bytes long – and this only has significance for the serving MME.

For the network to ascertain what MME is serving what TMSI the terminal is also assigned a Globally Unique Temporary (UE) Identity (GUTI), to identify the MME that knows the TMSI to IMSI mapping.

The GUTI is made up of the MNC/MCC combination, then an MME group ID to identify the MME group the serving MME is in, a MME code to identify the MME that allocated the TMSI and finally the TMSI itself.

The decision to use the TMSI or GUTI in a dialog is dependant on the needs of the dialog and what information both sides have. For example in an MME change the GUTI is needed so the original IMSI can be determined by the new MME, while in a normal handover the TMSI is enough.

LTE (4G) – EUTRAN – Key Distribution and Hierarchy

LTE, Mobile Networks, RF, RFCs & Standards, Security, SIM Cards, , , ,

We’ve talked a bit in the past few posts about keys, K and all it’s derivatives, such as Kenc, Kint, etc.

Each of these is derived from our single secret key K, known only to the HSS and the USIM.

To minimise the load on the HSS, the HSS transfers some of the key management roles to the MME, without ever actually revealing what the secret key K actually is to the MME.

This means the HSS is only consulted by the MME when a UE/Terminal attaches to the network, and not each time it attaches to different cell etc.

When the UE/Terminal first attaches to the network, as outlined in my previous post, the HSS also generates an additional key it sends to the MME, called K-ASME.

K-ASME is the K key derived value generated by the HSS and sent to the MME. It sands for “Access Security Management Entity” key.

When the MME has the K-ASME it’s then able to generate the other keys for use within the network, for example the Kenb key, used by the eNodeB to generate the keys required for communications.

The USIM generates the K-ASME itself, and as it’s got the same input parameters, the K-ASME generated by the USIM is the same as that generated by the HSS.

The USIM can then give the terminal the K-ASME key, so it can generate the same Kenb key required to generate keys for complete communications.

Showing Kamse generation sequence in LTE. Image sourced from IMTx: NET02x course on Edx,

LTE (4G) – Ciphering & Integrity of Messages

LTE, Mobile Networks, RF, RFCs & Standards, Security, , ,

We’ve already touched on how subscribers are authenticated to the network, how the network is authenticated to subscribers.

Those functions are done “in the clear” meaning anyone listening can get a copy of the data transmitted, and responses could be spoofed or faked.

To prevent this, we want to ensure the data is ciphered (encrypted) and the integrity of the data is ensured (no one has messed with our packets in transmission or is sending fake packets).

Ciphering of Messages

Before being transmitted over the Air interface (Uu) each packet is encrypted to prevent eavesdropping.

This is done by taking the plain text data and a ciphering sequence for that data of the same length as the packet and XORing two.

The terminal and the eNodeB both generate the same ciphering sequence for that data.

This means to get the ciphered version of the packet you simply XOR the Ciphering Sequence and the Plain text data.

To get the plain text from the ciphered packet you simply XOR the ciphered packet and ciphering sequence.

The Ciphering Sequence is made up of parts known only to the Terminal and the Network (eNB), meaning anyone listening can’t deduce the same ciphering sequence.

The Ciphering Sequence is derived from the following input parameters:

  • Key Kenc
  • Packet Number
  • Bearer Number
  • Direction (UL/DL)
  • Packet Size

Is is then ciphered using a ciphering algorithm, 3GPP define two options – AES or SNOW 3G. There is an option to not generate a ciphering sequence at all, but it’s not designed for use in production environments for obvious reasons.

Diagram showing how the ciphering algorithm generates a unique ciphering sequence to be used. Image sourced from IMTx: NET02x course on Edx,

Ciphering Sequences are never reused, the packet number increments with each packet sent, and therefore a new Cipher Sequence is generated for each.

Someone listening to the air interface (Uu) may be able to deduce packet size, direction and even bearer, but without the packet number and secret key Kenc, the data won’t be readable.

Data Integrity

By using the same ciphering sequence & XOR process outlined above, we also ensure that data has not been manipulated or changed in transmission, or that it’s not a fake message spoofing the terminal or the eNB.

Each frame contains the packet and also a “Message Authentication Code” or “MAC” (Not to be confused with media access control), a 32 bit long cryptographic hash of the contents of the packet.

The sender generates the MAC for each packet and appends it in the frame,

The receiver looks at the contents of the packet and generates it’s own MAC using the same input parameters, if the two MACs (Generated and received) do not match, the packet is discarded.

This allows the receiver to detect corrupted packets, but does not prevent a malicious person from sending their own fake packets,

To prevent this the MAC hash function requires other input parameter as well as the packet itself, such as the secret key Kint, packet number, direction and bearer.

How the MAC is generated in LTE. Image sourced from IMTx: NET02x course on Edx,

By adding this we ensure that the packet was sourced from a sender with access to all this data – either the terminal or the eNB.

LTE (4G) – Authenticating the Network

EPC, LTE, Mobile Networks, RF, RFCs & Standards, Security, SIM Cards, , , ,

In my last post we discussed how the network authenticated a subscriber, now we’ll look at how a subscriber authenticates to a network. There’s a glaring issue there in that the MME could look at the RES and the XRES and just say “Yup, OK” even if the results differed.

To combat this LTE networks have mutual authentication, meaning the network authenticates the subscribers as we’ve discussed, and the subscribers authenticate the network.

To do this our HSS will take the same random key (RAND) we used to authenticate the subscriber, and using a different cryptographic function (called g) take the RAND, the K value and a sequence number called SQN, and using these 3 inputs, generate a new result we’ll call AUTN.

The HSS sends the RAND (same as RAND used to authenticate the subscriber) and the output of AUTN to the MME which forwards it to the eNB to the UE which passes the RAND and AUTH values to the USIM.

The USIM takes the RAND and the K value from the HSS, and it’s expected sequence number. With these 3 values it applies the cryptographic function g generates it’s own AUTN result.

If it matches the AUTN result generated by the HSS, the USIM has authenticated the network.

LTE (4G) – Authenticating Subscribers

EPC, LTE, Mobile Networks, RF, RFCs & Standards, SDM, SIM Cards, , , ,

The USIM and the HSS contain the subscriber’s K key. The K key is a 128 bit long key that is stored on the subscriber’s USIM and in the HSS along with the IMSI.

The terminal cannot read the K key, neither can the network, it is never transmitted / exposed.

When the Terminal starts the attach procedure, it includes it’s IMSI, which is sent to the MME.

The MME then sends the the HSS a copy of the IMSI.

The HSS looks up the K key for that IMSI, and generates a random key called RAND.

The HSS and runs a cryptographic function (called f) using the input of RAND and K key for that IMSI, the result is called XRES (Expected result).

The HSS sends the output of this cryptographic function (XRES), and the random value (RAND) back to the MME.

The MME forwards the RAND value to the USIM (via eNB / Terminal), and stores a copy of the expected output of the cryptographic function.

The USIM take the RAND and the K key and performs the same cryptographic function the HSS did on it with the input of the K key and RAND value to generate it’s own result (RES).

The result of this same function (RES) is then sent from the USIM to the terminal which forwards it to the MME.

The MME and comparing the result the HSS generated (XRES) with the result the USIM generated. (RES)

If the two match it means both the USIM knows the K key, and is therefore the subscriber they’re claiming to be.

If the two do not match the UE is refused access to the network.

Next up, how the UE authenticates the network.

LTE (4G) – USIM Basics

LTE, Mobile Networks, RF, RFCs & Standards, Security, SIM Cards, , , , , , , ,

I’ve been working on private LTE recently, and one of the first barriers you’ll hit will be authentication.

LTE doesn’t allow you to just use any SIM to authenticate to the network, but instead relies on mutual authentication of the UE and the network, so the Network knows it’s talking to the right UE and the UE knows it’s talking to the right network.

So because of this, you have to have full control over the SIM and the network. So let’s take a bit of a dive into USIMs.

So it’s a SIM card right?

As a bit of background; the ever shrinking card we all know as a SIM is a “Universal integrated circuit card” – a microcontroller with it’s own OS that generally has the ability to run Java applets.

One of the Java applets on the card / microcontroller will be the software stack for a SIM, used in GSM networks to authenticate the subscriber.

For UMTS and LTE networks the card would have a USIM software stack allowing it to act as a USIM, the evolved version of the SIM.

Because it’s just software a single card can run both a USIM and SIM software stack, and most do.

As I’m building an LTE network we’ll just talk about the USIM side of things.

USIM’s role in Authentication

When you fire up your mobile handset the baseband module in it communicates with the USIM application on the card.

When it comes time to authenticate to the network, and authenticate the network itself, the baseband module sends the provided challenge information from the network to the USIM which does the crypto magic to generate responses to the authentication challenges issued by the network, and the USIM issues it’s own challenges to the network.

The Baseband module provides the ingredients, but the USIM uses it’s secret recipe / ingredients combo, known only to the USIM and HSS, to perform the authentication.

Because the card challenges the network it means we’ve got mutual authentication of the network.

This prevents anyone from setting up their own radio network from going all Lionel Ritche and saying “Hello, is it me you’re looking for” and having all the UEs attach to the malicious network. (Something that could be done on GSM).

It’s worth noting too that because the USIM handles all this the baseband module, and therefore the mobile handset itself, doesn’t know any of the secret sauce used to negotiate with the network. It just gets the challenge and forwards the ingredients down to the USIM which spits back the correct response to send, without sharing the magic recipe.

This also means operators can implement their own Crypto functions for f and g, so long as the HSS and the USIM know how to generate the RES and AUTN results, it’ll work.

What’s Inside?

Let’s take a look at the information that’s stored on your USIM:

All the GSM stuff for legacy SIM application

Generally USIMs also have the ability to operate as SIMs in a GSM network, after all it’s just a different software stack. We won’t touch on GSM SIMs here.

ICCID

Because a USIM is just an application running on a Universal Integrated Circuit Card, it’s got a ICCID or Universal Integrated Circuit Card ID. Generally this is the long barcode / string of numbers printed on the card itself.

The network generally doesn’t care about this value, but operators may use it for logistics like shipping out cards.

PIN & PUK

PINs and PUKs are codes to unlock the card. If you get the PIN wrong too many times you need the longer PUK to unlock it.

These fields can be written to (when authenticated to the card) but not read directly, only challenged. (You can try a PIN, but you can’t see what it’s set too).

As we mentioned before the terminal will ask the card if that’s correct, but the terminal doesn’t know the PIN either.

IMSI

Each subscriber has an IMSI, an International Mobile Subscriber Identity.

IMSIs are hierarchical, starting with 3 digit Mobile Country Code MCC, then the Mobile Network Code (MNC) (2/3 digits) and finally a Mobile Subscription Identification Number (MSIN), a unique number allocated by the operator to the subscribers in their network.

This means although two subscribers could theoretically have the same MSIN they wouldn’t share the same MNC and MCC so the ISMI would still be unique.

The IMSI never changes, unless the subscriber changes operators when they’ll be issued a new USIM card by the new operator, with a different IMSI (differing MNC).

The MSIN isn’t the same as the phone number / MSISDN Number, but an IMSI generally has a MSISDN associated with it by the network. This allows you to port / change MSISDN numbers without changing the USIM/SIM.

K – Subscriber Key

Subscriber’s secret key known only to the Subscriber and the Authentication Center (AuC/ HSS).

All the authentication rests on the principle that this one single secret key (K) known only to the USIM and the AuC/HHS.

OP – Operator Code

Operator Code – same for all SIMs from a single operator.

Used in combination with K as an input for some authentication / authorisation crypto generation.

Because the Operator Code is common to all subscribers in the network, if this key were to be recovered it could lead to security issues, so instead OPc is generally used.

OPc – Operator Code (Derived)

Instead of giving each USIM the Operator Code a derived operator code can be precomputed when the USIM is written with the K key.

This means the OP is not stored on the USIM.

OPc=Encypt-Algo(OP,Key)

PLMN (Public Land Mobile Network)

The PLMN is the combination of MCC & MNC that identifies the operator’s radio access network (RAN) from other operators.

While there isn’t a specific PLMN field in most USIMs it’s worth understanding as several fields require a PLMN.

HPLMNwAcT (HPLMN selector with Access Technology)

Contains in order of priority, the Home-PLMN codes with the access technology specified.

This allows the USIM to work out which PLMN to attach to and which access technology (RAN), for example if the operator’s PLMN was 50599 we could have:

  • 50599 E-UTRAN
  • 50599 UTRAN

To try 4G and if that fails use 3G.

In situations where operators might partner to share networks in different areas, this could be set to the PLMN of the operator first, then it’s partnered operator second.

OPLMNwACT (Operator controlled PLMN selector with Access
Technology)

This is a list of PLMNs the operator has a roaming agreement with in order of priority and with the access technology.

An operator may roam to Carrier X but only permit UTRAN access, not E-TRAN.

FEHPLMN (Equivalent HPLMN)

Used to define equivalent HPMNs, for example if two carriers merge and still have two PLMNs.

FPLMN (Forbidden PLMN list)

A list of PLMNs the subscriber is not permitted to roam to.

HPPLMN (Higher Priority PLMN search period)

How long in seconds to spend between each PLMN/Access Technology in HPLMNwAcT list.

ACC (Access Control Class)

The ACC allows values from 0-15, and determines the access control class of the subscriber.

In the UK the ACC values is used to restrict civilian access to cell phone networks during emergencies.

Ordinary subscribers have ACC numbers in the range 0 – 9. Higher priority users are allocated numbers 12-14.

During an emergency, some or all access classes in the range 0 – 9 are disabled.

This means service would be could be cut off to the public who have ACC value of 0-9, but those like first responders and emergency services would have a higher ACC value and the network would allow them to attach.

AD (Administrative Data)

Like the ACC field the AD field allows operators to drive test networks without valid paying subscribers attaching to the network.

The defined levels are:

  • ’00’ normal operation.
  • ’80’ type approval operations.
  • ’01’ normal operation + specific facilities.
  • ’81’ type approval operations + specific facilities.
  • ’02’ maintenance (off line).
  • ’04’ cell test operation.

GID 1 / 2 – Group Identifier

Two group identifier fields that allow the operator to identify a group of USIMs for a particular application.

SPN (Service Provider Name)

The SPN is an optional field containing the human-readable name of the network.

The SPN allows MVNOs to provide their own USIMs with their name as the operator on the handset.

ECC (Emergency Call Codes)

Codes up to 6 digits long the subscriber is allowed to dial from home screen / in emergency / while not authenticated etc.

MSISDN

Mobile Station International Subscriber Directory Number. The E.164 formatted phone number of the subscriber.

This is optional, as porting may overwrite this, so it doesn’t always match up.

References:

https://www.etsi.org/deliver/etsi_ts/131100_131199/131102/12.05.00_60/ts_131102v120500p.pdf

IMTx: NET02x (4G Network Essentials) – Mobility Management – 3. Processing Location Updates

EPC, EUTRAN, LTE, Mobile Networks, Notes, RF, , , , ,

These are my lecture notes from IMT’s NET02x (4G Network Essentials) course, I thought I’d post them here as they may be useful to someone. You can find my complete notes here.

Let’s look at how the Tracking Area Updates work from the point of view of the network.

Let’s take an example of a UE which has been sent the Tracking Area List TA0 and TA1, which is currently in ECM_IDLE state served by eNBs in Tracking Area 1.

The UE is moving towards another eNB in Tracking Area 2. As the UE listens on the Broadcast Channel the power of the new eNB overtakes that of the previous eNB, but the UE notes the Tracking Area of the new eNB, which is not on the UE’s Tracking Area List.

So the UE must make a Tracking Area Update to inform the network.

The first thing to do is to establish a radio connection.

Once the radio connection is setup a S1-AP connection is setup, upon which an NAS message – EMM Tracking Area Update Request is sent which contains the GUIT and old Tracking Area ID, which is sent to the MME.

The MME then sends back a new Tracking Area List for the UE and new TMSI to update the GUTI of the subscriber.

The UE updates it’s GUTI, updates it’s Tracking Area List, sends an EMM TRACKING AREA UPDATE COMPLETE and the UE returns to ECM_IDLE state.

Further Reading

IMTx: NET02x (4G Network Essentials) – Mobility Management – 4. Changing MME and SGW

EPC, EUTRAN, LTE, Notes, RF, , ,

These are my lecture notes from IMT’s NET02x (4G Network Essentials) course, I thought I’d post them here as they may be useful to someone. You can find my complete notes here.

As we’ve seen earlier, the eNB needs a connection to an MME and a S-GW.

However different eNBs may connect to different S-GWs or different MMEs, and our UE may connect to any eNB, so we need a way to handover between S-GWs and MMEs.

Handover to new S-GW

Let’s take a look at a scenario where a UE is moving from one eNB to another, and each of the two eNBs is in a different S-GW.

At the start we have a connection from the MME to the S-GW, a GTP-C tunnel for control information and a GTP-U tunnel (called the S5/58 bearer) that carriers the user data over GTP-U between the P-GW and the S-GW.

As the UE moves to the eNB in TA2 we need the MME to modify the tunnel from the P-GW to the S-GW to change it from connecting the P-GW to the old S-GW and instead connecting the P-GW to the new S-GW.

The MME establishes a new tunnel for control to the new S-GW, and sends a message to the new S-GW to modify the tunnel from the P-GW to the old S-GW to point to the new S-GW.

Handover to new MME

IMTx: NET02x (4G Network Essentials) – Mobility Management – 2. Balancing Location Update Load

EPC, EUTRAN, LTE, Notes, RF, ,

These are my lecture notes from IMT’s NET02x (4G Network Essentials) course, I thought I’d post them here as they may be useful to someone. You can find my complete notes here.

As we saw before larger Tracking Areas minimize the number of UEs between terminals to update their location.

The problem is the cells/eNBs on the edge of the Tracking Area have to handle almost all of the Tracking Area Update requests, to inform the network the UE has moved to a new TA.

The cells on the edges of the tracking area are shaded & handle the vast majority of the Tracking Area / Location Update messages

There’s an obvious imbalance between edge cells that handle almost all of Tracking Area Updates and the central cells inside a Tracking Area that handle very few many Tracking Area Update messages.

As we know we only have one radio interface, and sending Tracking Area Updates eats into our valuable radio resources that can’t be used to carry user data. Because of this users can experience a lower bit rate on edge cells.

To get around this we group Tracking Areas together into Tracking Area Lists.

A Tracking Area List is provided by the network to the UE, and contains a list of Tracking Areas, so long as the UE stays within the list of Tracking Areas, there is no need for it to send a Tracking Area Update.

You might think this just makes our problem worse, as now at the edges of the cells in the Tracking Area List we have even more signaling traffic, the clever part comes from the fact the network gives out different Tracking Area Lists to different UEs.

In the example below we can see UE2 has a different Tracking Area List to UE1.

This means the cell edges are different for UE1 and UE2, which spreads the signaling load across Tracking Areas, so while UE2 will send a Tracking Area Update when it reaches the border from TA1 to TA4, UE1 will send a Tracking Area Update when it passes from TA6 to TA9.

The other limitation of this is now to reach a UE paging must be sent on all cells in the Tracking Area List.

IMTx: NET02x (4G Network Essentials) – Mobility Management – 1. Managing Location

EPC, EUTRAN, LTE, Mobile Networks, Notes, RF, , , , , ,

These are my lecture notes from IMT’s NET02x (4G Network Essentials) course, I thought I’d post them here as they may be useful to someone. You can find my complete notes here.

As we saw with the Network Triggered Service Request, the network needs to know which eNB / cell the UE is currently being served by.

The UE knows which cell it should use as it’s always listening on the broadcast channel to know the received power levels of the nearby eNBs.

Paging

If our UE is in ECM IDLE state and the network needs to contact the UE, the eNB sends sends a Paging Request on the Beacon (Broadcast) Channel with the UE’s RNTI.

The UE is always listening on the Beacon Channel for it’s own RNTI, and when it hears it’s own RNTI it follows the process to come back from ECM_IDLE state to ECM_CONNECTED state.

For this to work the network needs to know which eNB to send the Paging request to.

For this to work our UE would need to inform the network each time it changes eNB, but, as we’ve touched upon several times, minimizing power consumption is a constant architecture constraint in LTE.

So if the UE has to transmit each time a UE moves to a different eNB / Cell, the UE power consumption would be high and the battery life of the UE would be low.

If we imagine driving along a freeway at speed, with each eNB serving an area of 1km, at 60kph, our UE would change cells every minute, and if the UE needs to transmit to let the network know it’s changing location, we’d be transmitting data every 60 seconds even if the UE is sitting in our pocket, all these transmissions would lead to lower battery life on the UE.

Tracking Areas

To work around the power wastage of each UE transmitting data to the network to let it know each time it changes eNB, 3GPP designers decided to group eNBs in the same geographic area into Tracking Areas or TAs.

This means instead of the network knowing exactly which eNB a UE is located in, it has it’s location down to a tracking area made up of several eNBs. (Tens to hundreds of cells per TA)

To go back to our freeway example, we might group all the eNBs along a freeway into one Tracking Area, all of which broadcast the ID of each eNB and the Tracking Area of each eNB.

As the UE moves from one eNB to another eNB in the same Tracking Area, there’s no need for the UE to send a Tracking Area Update message as it’s reamining in the same Tracking Area.

Tracking Area Update messages only need to be sent when the UE moves to an eNB in a different Tracking Area.

UEs can move from cell to cell inside TA1 without needing to update the network.
Only when a UE moves from a eNB / cell in TA1 to TA2, does it need to send a Tracking Area Update message to the network.

Paging a Tracking Area

As the network knows the location of our UE down to a tracking area, when it comes time to Page a UE a Paging Request is simply sent from the MME to all eNBs in the Tracking Area that the UE is in.

This means the RNTI of the UE is broadcast out of all eNBs in that tracking Area, and the UE establishes connectivity once again with it’s nearest eNB.

IMTx: NET02x (4G Network Essentials) – Management of Sporadic Data Flows – 3. Standby Modes

EPC, EUTRAN, LTE, Notes, RF, , , , ,

These are my lecture notes from IMT’s NET02x (4G Network Essentials) course, I thought I’d post them here as they may be useful to someone. You can find my complete notes here.

As we discussed before when no data has been sent by a UE for a period of time the eNB will switch from an ECM-Connected state to an ECM-Idle state where there is no radio connection.

ECM-Connected state

So let’s look at the release procedure.

When the transmission timeout (typically 10 – 30 seconds) has expired, meaning a user hasn’t sent data for that length of time, the eNB sends the MME a S1-AP UE Context Release Request with the cause of User Inactivity to denote why the change is being made.

The MME then sends a GTP-C message requesting release of the tunnel between the S-GW and the eNB (GTP-C Release request).

The S-GW sends back a GTP-C Release Access Bearers response, indicating it has cleared down the GTP tunnel between itself and the eNB,

The MME then sends a S1-AP UE Context Release Command to the eNB, and the eNB sends an RRCConnectionRelease which releases the RNTI assigned to that UE removing it’s radio resources.

Finally a S1-AP UE Context Release Complete is sent from eNB to the MME to let the MME know the process has completed.

Release procedure

At this stage the RNTI is no longer active so the UE cannot use the RNTI and therefore cannot be assigned radio resources.

The UE is now in ECM_Idle mode, however as it still has an IP Address allocated and can be bought back it’s in EMM_Regsitered mode.

States

EMM-Deregistered State

UE is disconnected from the network with no radio resources and does not have an IP Address

EMM-Registered & ECM-Connected

  • UE is connected to the network with an IP address
  • Radio resources (RNTI allocated)
  • Location of the UE known
  • All tunnels & connections established

EMM-Regsitered & ECM-Idle

  • UE has an IP address & appears to be connected
  • No radio resources (RNTI) currently in use
  • No tunnels or connection from the eNB to the S-GW & MME.
  • Tunnel between S-GW and P-GW and the tunnel between the MME and S-GW
  • A relative location (tracking area) of the UE is available