Tag Archives: Slicing

How 5G “Slices” are purchased and activated in Android

5G SA, Mobile Networks, ,

Slicing has long been held up as one of the monetizations opportunities for residential customers, but few seem to be familiar with it beyond a concept, so I thought I’d take a look at how it actually works in Android, and how an end user would interact with it.

For starters, there’s a little used hook in Android TelephonyManager called purchasePremiumCapability, this method can be called by a carrier’s self care app.

You can pass it the type of “Slice” (capability) to purchase, for example PREMIUM_CAPABILITY_PRIORITIZE_LATENCY for the slice.

Operators would need the Telephony Permission for their app, and a function from the app in order to activate this, but it doesn’t require on Android Carrier Privileges and a matching signature on the SIM card, although there’s a lot of good reasons to include this in your Android Manifest for a Carrier Self-Care app.

We’ve made a little test app we use for things like enabling VoLTE, setting the APNs, setting carrier config, etc, etc. I added the Purchase Slice capability to it and give it a shot.

Android Studio Carrier Privilages

And the hook works, I was able to “purchase” a Slice.

App running on a Samsung phone shown with SCRCPY

I did some sleuthing to find if any self-care apps from carriers have implemented this functionality for standards-based slicing, and I couldn’t find any, I’m curious to see if it takes off – as I’ve written about previously slicing capabilities are not new in cellular, but the attempt to monetise it is.

More info in Telephony Manager – purchasePremiumCapability – Android Developers

Pre-5G Network Slicing

5G SA, EPC, EUTRAN, GSM, LTE, Mobile Networks, RFCs & Standards, , , , ,

Network Slicing, is a new 5G Technology. Or is it?

Pre 3GPP Release 16 the capability to “Slice” a network already existed, in fact the functionality was introduced way back at the advent of GPRS, so what is so new about 5G’s Network Slicing?

Network Slice: A logical network that provides specific network capabilities and network characteristics

3GPP TS 123 501 / 3 Definitions and Abbreviations

Let’s look at the old and the new ways, of slicing up networks, pre release 16, on LTE, UMTS and GSM.

Old Ways: APN Separation

The APN or “Access Point Name” is used so the SGSN / MME knows which gateway to that subscriber’s traffic should be terminated on when setting up the session.

APN separation is used heavily by MVNOs where the MVNO operates their own P-GW / GGSN.
This allows the MNVO can handle their own rating / billing / subscriber management when it comes to data.
A network operator just needs to setup their SGSN / MME to point all requests to setup a bearer on the MVNO’s APN to the MNVO’s gateways, and presoto, it’s no longer their problem.

Later as customers wanted MPLS solutions extended over mobile (Typically LTE), MNOs were able to offer “private APNs”.
An enterprise could be allocated an APN by the MNO that would ensure traffic on that APN would be routed into the enterprise’s MPLS VRF.
The MNO handles the P-GW / GGSN side of things, adding the APN configuration onto it and ensuring the traffic on that APN is routed into the enterprise’s VRF.

Different QCI values can be assigned to each APN, to allow some to have higher priority than others, but by slicing at an APN level you lock all traffic to those QoS characteristics (Typically mobile devices only support one primary APN used for routing all traffic), and don’t have the flexibility to steer which networks which traffic from a subscriber goes to.

It’s not really practical for everyone to have their own APNs, due in part to the namespace limitations, the architecture of how this is usually done limits this, and the simple fact of everyone having to populate an APN unique to them would be a real headache.

5G replaces APNs with “DNNs” – Data Network Names, but the functionality is otherwise the same.

In Summary:
APN separation slices all traffic from a subscriber using a special APN and provide a bearer with QoS/QCI values set for that APN, but does not allow granular slicing of individual traffic flows, it’s an all-or-nothing approach and all traffic in the APN is treated equally.

The old Ways: Dedicated Bearers

Dedicated bearers allow traffic matching a set rule to be provided a lower QCI value than the default bearer. This allows certain traffic to/from a UE to use GBR or Non-GBR bearers for traffic matching the rule.

The rule itself is known as a “TFT” (Traffic Flow Template) and is made up of a 5 value Tuple consisting of IP Source, IP Destination, Source Port, Destination Port & Protocol Number. Both the UE and core network need to be aware of these TFTs, so the traffic matching the TFT can get the QCI allocated to it.

This can be done a variety of different ways, in LTE this ranges from rules defined in a PCRF or an external interface like those of an IMS network using the Rx interface to request a dedicated bearers matching the specified TFTs via the PCRF.

Unlike with 5G network slicing, dedicated bearers still traverse the same network elements, the same MME, S-GW & P-GW is used for this traffic. This means you can’t “locally break out” certain traffic.

In Summary:
Dedicated bearers allow you to treat certain traffic to/from subscribers with different precedence & priority, but the traffic still takes the same path to it’s ultimate destination.

Old Ways: MOCN

Multi-Operator Core Network (MOCN) allows multiple MNOs to share the same active (tower) infrastructure.

This means one eNodeB can broadcast more than one PLMN and server more than one mobile network.

This slicing is very coarse – it allows two operators to share the same eNodeBs, but going beyond a handful of PLMNs on one eNB isn’t practical, and the PLMN space is quite limited (1000 PLMNs per country code max).

In Summary:
MOCN allows slicing of the RAN on a very coarse level, to slice traffic from different operators/PLMNs sharing the same RAN.

Its use is focused on sharing RAN rather than slicing traffic for users.