Tag Archives: Local Number Portability

Call routing in LNP

02/11/2019Australian TelcoACMA, LNP, Local Number Portability, Local Number PortingNick

Before we get started there’s a few key concepts we’ve got to be familiar with:

PLNR
Donor Carrier
Losing CSP
Gaining CSP
Donor Transit Routing
Third Party Ports

If you’re not familiar with some of these concepts go back to the LNP FAQ and Anatomy of Local Number Portability in Australia posts which explain them.

Before Porting

In the beginning ACA created the heavens and the earth? Wait, no, the Numbering Plan for Australia.

The numbering system lists all the phone numbers in Australia and the carrier they’re assigned to (Donor Carrier when ported).

This means each carrier downloads this data from what is now ACMA (but was at the time ACA) and for each outgoing call look the number up in that data set and route to the correct carrier.

This routing is used when a number has not been ported – The CSP it’s allocated to by ACMA is the CSP to route calls to.

During Porting – Donor & Losing CSP the Same

At the time the number is ported the Losing CSP provides Donor Transit Routing – In practice this is nothing more than a fancy redirection/ forward to the new carrier.

Once the port is completed (and the Emergency Porting Return period has expired) the Losing CSP (who in this case is also the donor CSP) updates their PLNR file, to include the number that’s just been ported out and the new carrier’s code.

During Porting – Donor & Losing CSP Different (3rd Party Porting)

At the time the number is ported the Losing CSP provides Donor Transit Routing – In practice this is nothing more than a fancy redirection/ forward to the new carrier.

Once the port is completed (and the Emergency Porting Return period has expired) the Donor CSP updates their PLNR file, to update the record for the ported number, which previously showed the code of the Losing CSP and now must show the new CSP code.

After Porting – PLNR Update

After the PLNR has been updated by the Donor CPSs, other CPS that participate in porting must update their routing records to ensure they route directly to the Gaining CSP and not to the Donor CSP and rely on Donor Routing.

Donor Routing is only required to be in place for a short time, meaning carriers that don’t update their routes will find the ported destination unreachable once donor transit routing has been stopped.

LNP / Porting FAQ

02/11/2019Australian Telco, RFCs & StandardsACMA, LNP, Local Number Portability, Local Number PortingNick

This is a follow up to my other post on LNP (Anatomy of Local Number Porting in Australia) with some of the frequently asked questions.

For more info on the routing I’ve also written about Call Routing in LNP.

I’ve cited the relevant section of the code below and you can find the code itself here – Communications Alliance – Local Number Portability.

Why am I still billed after a number is ported out?

The Losing CSP does not need to take any action to disconnect Customer’s Telephone Number(s).
3.4.3

This means just porting out a number from a CSP doesn’t mean billing from the Loosing CSP will stop.

Continuing contractual agreements between the customer and Loosing CSP may still be in place and the customer is responsible for requesting the services be cancelled with the Loosing CSP.

Some CSPs work out that if you’re porting out a number you don’t want their services anymore, but they’re not obliged to and most will do what they can get away with.

What is a Bilateral Peering Agreement?

While a customer is legally entitled to move a number they have full control over (As outlined in Telecommunications Numbering Plan 2015), in practice phone numbers can only be moved from one carrier to another if both CSPs have a Bilateral Peering Agreement with each other.

These agreements primarily sort out the commercials of how much they’ll pay each other per port in / out.

It’s worth also noting that the Code only defines the minimum standard and process, two CSPs that have a bilateral peering agreement in place are able to process ports faster and more efficiently than the minimum standard outlined in the code.

Carriage Service Provider vs Carrier?

I’ve been sing the term Carriage Service Provider and Carrier interchangeably.

The difference as far as the code is concerned is one is who a customer pays for the service, while the other is the provider of the service. Generally it’s safe to assume that the CSP is also the Carrier and not a re-seller.

Donor Carriers

Under the Numbering Plan managed by ACMA numbers are allocated to certain CSPs.

These numbers can be ported to other CSPs (this is after all what LNP is all about) but after the number is routed to a different carrier the Donor Carrier remains the carrier listed in the Numbering Plan.

The Donor Carrier is responsible for Donor Transit Routing (A temporary redirect to numbers that have been ported away recently) for any numbers that have recently been ported out, and publishing the number and new carrier details for each number ported out in their PLNR file.

Donor Transit Routing

Under the Numbering Plan managed by ACMA numbers are allocated to certain CSPs.

In a scenario where a call needs to route to a destination where the current carrier for that destination is unknown, the call is routed to the Donor Carrier, as that’s who the number is originally allocated to by ACMA.

Upon reciept of a call by the donor carrier to a number that has been ported out, the donor’s switch finds the correct Access Service Deliver (ASD) and redirects the call to them.

This is a temporary service – CSPs are only obliged to do this for 5 days, after which it’s assumed the PLNR file of the donor will have been read by all the other CSPs and they’ll be routing the traffic to the correct CSP and not the Donor CSP.

Third Party Ports

Third Party Porting is where the Donor Carrier is neither the Losing Carrier or the Gaining Carrier. Third Party Porting requires bilateral agreements to be in place between each of the parties involved.

As we just covered ACMA allocates numbers to CSPs, when a number is ported to a different CSP the number is still allocated to the original CSP as far as ACMA and The Numbering System are concerned.

The CSP the number was originally allocated to is the Donor CSP – forever.

Let’s look at a two party port first:

A number is allocated by ACMA to CSP 1
The customer using that number decides to port the to CSP 2 using the standard LNP process
CSP 1 performs Donor Transit Routing for the required 5 days and updates it’s PLNR file to denote that the number has been ported to CSP 2

Now let’s consider a three party port, carrying on from the steps above.

The Customer decides they want to move from CSP 2 to another CSP – CSP 3
At the time of the port the donor CSP (CSP 1) must:
CSP 1 must update it’s PLNR records for this number to denote it’s no longer with CSP 2 but is now with CSP 3
CSP 1 must provide Donor Transit Routing for the required 5 business days – redirecting calls to CSP 3

So even though the number is moving from CSP 2 to CSP 3 as the number was originally allocated to CSP 1, it is, and will always be the Donor Carrier and as such has to provide Donor Transit Routing and update it’s PLNR each time the number is ported.

Port Reversal / Emergency Return

Ports have an emergency return window inside which the port can be reverted. For Cat C ports this invovles the project manager of one CSP contacting the project manager for the other CSP and requesting the return.

In the event the end customer has requested the Port Reversal / Emergency return they’re typically liable for a very hefty fee to do so.

Give Back & Quarantine of Numbers

After a number is no longer required, it’s given back to the donor carrier who places it in quarantine and typically does not reallocate the number for 6 months.

In some cases such as a wronly cancelled number the customer may be able to get a number that’s been cancelled back while it’s in it’s quarantine state, however this is not required and up to the donor carrier.

Including Customer Account Numbers when Porting

Prior to 2016, a customer moving from one CSP to another CSP were required to include their account number (“Service Account Number”) they had with the Loosing CSP to the Gaining CSP when submitting the Port which was verified against the Loosing Carrier’s records to ensure the correct Customer / Service combo.

This led to a lot of ports being rejected unnecessarily due to mismatched account numbers, as such the the requirement to include a valid matching account number with the loosing CSP has been removed.

Service Account is to remain as a mandatory field, and a standard validation but any mismatches are not to be rejected.

Where’s Cat B & Cat D?

Cat B Dropped in 2013 revision due to lack of use.

Cat D is almost the same as a Cat A port but allows services with an active ULL diversion to be ported. These are quite rare and a very specific use case.

Why is my Cat C Port taking so long?

You may find after submitting a port the date you’ve got back for porting is months away. The Loosing Carrier sets the porting date, and as they’re loosing the customer, they’re often not so keen to action the port quickly when they’re loosing the customer after all.

Lead Times are determined by the Losing Carrier. These may vary by product including variations due to the size of the product or the number of sites to which a particular service is offered.
3.5.10

Tidbit: One of Australia’s largest carriers has a 20,000 number per day limit on porting, meaning they’re only able to process up to 20,000 ports per day in or out. Once that limit is reached no more ports can be accepted for that day, so the ports are delayed until the next day, etc, etc, leading to considerable lead times.

The code requires CSPs to keep Service Metrics on porting time-frames, but there’s no penalty for being slow. (Section 3.6)

Third Party ports also take a lot longer due to the requirement to find a time window that suits all 3 carriers.

Can I arrange my numbers to be Ported after-hours?

CSPs are not required to port numbers outside of the “Standard Hours” defined in the code. (Section 3.8.1 )

However, most CSPs have included support for this inside their bilateral agreements with other carriers. This typically costs more for the customer, but also comes with the added risk of if the port fails there are fewer technical / engineering resources available at the Loosing and Gaining Carrier’s respective ends to sort it out if something goes wrong.

What’s a PNO?

Porting Notification Order – A message containing either a Simple Notification Advise (SNO) for Simple (Cat A) ports, or a Complex Notification Advise (CNA) for Complex (Cat C) ports.

Each PNO contains a unique sequential reference number to differentiate / associate the PNO with a particular porting request.

PLNR – Ported Local Number Registry

PLNR is nothing more than a giant text file, containing a list of numbers originally allocated to that CSP but that have been ported to another CSP, and with each number that’s been ported out the carrier code of the CSP it’s now with.

Information to facilitate Call Routing is provided by the Donor Carrier who is required to notify Carriers, via a Ported Local Number Register, that a Port is pending, completed or did not proceed. This relates to all Ports, including Third Party Ports. All participants must use the Ported Local Number Registers to determine the correct Call Routing.

Typically transferred via Web interface:

… a web site that contains a file with a list of Telephone Numbers that have been Ported away from the Donor, or have just returned.

PLNR data is encoded as a fixed-format text file.

What is Re-targeting?

Re-Targeting is a fancy term of changing the date & time.

It’s typically more efficient to re-target a port than withdraw it and resubmit it.

For only two re-targets are allowed for each unique SNA. (Section 4.2.9)

Anatomy of Local Number Portability in Australia

27/10/2019Australian Telco, RFCs & Standards, VoIPACIF C540, CNA, LNP, Local Number Portability, Local Number Porting, PLNR, PNV, Porting, SNANick

The Australian telecommunications industry was deregulated in 1997, meaning customers could have telecommunications services through a Carriage Service Provider (CSP) of their choice.

In order to increase competition and make it easier to move to a different CSP, the ACMA (Or as they were then the ACA) declared that Local Numbers (Geo numbers / land lines) were a “Portable Service”. This meant that if a customer didn’t like their current Carriage Service Provider (CSP) they could give them the flick (making them the Loosing Carrier), move to a new CSP (Gaining Carrier) but keep their existing phone numbers by moving them to the new carrier in a process known as Local Number Portability (LNP).

The Local Number Portability (LNP) standard was first defined by Comms Alliance in 1999 in ACIF C540 and defines the process of moving numbers between Carriage Service Providers (CSPs), however 22 years later the process can still be a baffling system for many customers, end users and carrier staff to navigate.

Acronyms galore exist and often the porting teams involved themselves aren’t 100% sure what goes on in the porting process.

In 1997 ISDN was first still an emerging technology and porting was typically a customer moving from one PSTN / POTS line provided by one CSP to another PSTN / POTS line provided by a different CSP – a simple port.

Two processes were defined, one for managing simple ports involving moving one simple number from one CSP to another CSP – Called Simple Porting or “Cat A” – which made up the majority of porting requests at the time, and another process for everything else managed by a project manager from the Loosing and Gaining CSP called Complex Porting or “Cat C“.

Since 1997, the advent of the NBN, VoIP, SIP and the announcement that one of Australia’s largest carriers is shutting down their ISDN network by 2020, means that today the majority of ports a business customer will face will be Cat C – Complex Ports.

LNP is an issue worldwide, and ENUM was released to try and make this a bit better, however it had one short trial in Australia a long time ago and hasn’t been looked at since.

Cat A / Simple Number Porting

Simple porting, classified as “Cat A” is used for porting single simple services (numbers).

The Cat A process can only be used for moving a “simple” standalone number – with no additional features – from one carrier to another.

The typical use case for Cat A port is moving a one copper PSTN / POTS line (Active line with no Fax Duet, Line Hunt, etc) from one carrier to another – as I said before, Cat A ports made up the majority of porting requests when the system was first introduced as the vast majority of services were copper POTS lines.

The process is automated at both ends, essentially the carriers send each other the numbers to be moved (more on that later) and their switches automatically process this and begin routing the number.

These ports are typically completed within a few days to a week and the customer gets a notification when the port is completed.

Cat C / Complex Number Porting

For all number porting that don’t meet the very specific requirements of Cat A aren’t met – and sometimes even if they are met, ports are processed as Cat C ports.

Cat C ports require a project manager at both the Gaining Carrier and the Loosing Carrier to agree on the details for the port and the move the numbers, each using their own internal process.

Lead times on Cat C ports are long – and getting longer, so from submitting a port to it’s completion can take 90+ days, and there is no confirmation required to the customer to let them know the services have been ported successfully.

Administrative Process of Ports (CatA & CatC)

Strap yourself in for a whirlwind of acronyms…

The Code does not constrain two or more individual industry participants agreeing to different arrangements
Section 1.3.6

Because of this it means this is the minimum standard, some CSPs have improved upon this between each other, however there’s a bit of a catch 22 in that CSPs have no incentive to make porting numbers out easier, as they’re typically loosing that customer, so the process is typically not improved upon in any meaningful way that makes the customer experience easier.

Without further ado, here’s what Cat A & Cat C ports look like under the hood…

Note: These all assume the Losing CSP is also the Donor CSP. More on that in the LNP FAQ and Call Routing posts.

Cat A – Simple Porting – Process

Summary

Cat A ports are automated – The process involves CSPs transferring formatted data between each other and the process that goes on for these ports.

The Loosing CSP must use the Cat A process if the service meets the requirements to be ported under a Cat A and the Gaining Carrier has submitted it as a Cat A port. This means a Cat A port can’t be rejected by the loosing carrier as not a valid Cat A port to be resubmitted as a Cat C port, if it does actually meet the requirements for Cat A porting. That said numbers that are valid in terms of Cat A can be submitted as a Cat C, this is often cheaper than submitting multiple Cat A porting requests when you have more than 5 or so services to be ported.

Here’s a brief summary of the process:

Customer requests port and details are validated
Simple Notification Advice (SNA) is sent to the Loosing CSP via a Porting Notification Order (PNO) – Essentially a form send to the loosing CSP of the intention to port the service
Loosing CSP sends back SNA Confirmation Advice to confirm the service can be ported
Electronic Cutover Advice (ECA) sent by gaining CSP to indicate gaining CSP wanting to initiate port
Loosing CSP provides Donor Routing by essentially redirecting calls to the Gaining CSP
ECA Confirmation Advice sent by loosing CSP to denote the service has been removed from the loosing CSP’s network & number is with gaining CSP as far as they are concerned
Losing CSP updates a big text file (PLNR) with a list of numbers allocated to it, to show the numbers have been ported to a different carrier and indicates which carrier

We’ll talk about the technical process of how the data is transferred, what PLNR is and how routing is managed, later on.

In depth process:

Step 1 – Customer Authority

The Gaining CSP must obtain Customer’s Authority (CA) to port number (Section 4.1.2) – Typically this takes the form of a number porting form filled in by the customer, containing a list of numbers to port, account numbers with loosing carrier and date.

If requested by the customer the Loosing CSP must explain any costs / termination payments / contractual obligations to the customer (Section 4.1.4), however the Loosing CSP cannot reject the port based upon an outstanding contract being in place.

Step 2 – Validation

Before anything technical happens, the Gaining CSP must validate the porting request is valid – this means verifying:

The requested numbers are able to be ported under the selected method (Cat A or Cat C)
Confirming the date of the Customer Authority is less than 90 days old
The requested numbers must be recorded

In practice these 3 steps are typically handled by a single form filled out by the customer in the first step. (Section 4.1.5)

If requested by the Loosing CSP this Customer Authority information has to be given to the Loosing CSP. This typically happens in cases of disputed ownership / management of a number.

Step 3 – The SNA PNO

Once the Gaining CSP is satisfied the port is valid, a Simple Notification Advice (SNA) is sent to the Loosing CSP via a Porting Notification Order (PNO) (Section 4.2.2).

The PNO is essentially a form that includes:

Area Code & Telephone Number of service to be ported
Service Account number with Loosing CSP
Porting Category set to Cat A
Date of Customer Authority

The Loosing CSP must then validate this info, by checking: (Section 4.2.4)

The requested number is a Simple service (Meets the requirements of Cat A)
Is with the Loosing CSP (Has not been ported to another carrier already)
Is not disconnected or pending disconnection at the time the SNA was submitted
The Customer Authority (CA) date is not more than 90 days old
Does not currently have a port request pending

After the Loosing CSP has gone through this they will send back a SNA Confirmation Advice if the port request (SNA PNO) is valid or a SNA Reject Advice along with the phone number and reason for rejection if the port request is deemed invalid.

The confirmation, if SNA Confirmation Advice is received, is deemed valid for 30 days, after which the process would have to start again and the SNA PNO would have to be regenerated.

Step 4 – Electronic Cutover Advice (ECA)

After the Loosing CSP sends back a SNA Confirmation Advice, the gaining carrier sends the Loosing Carrier an Electronic Cutover Advice (ECA) via the Final Cutover Notification Interface (Section 4.2.24 ).

When the Loosing CSP get the ECA it’s showtime. The Loosing CSP checks that there’s a valid SNA in place for the number to be ported and that it’s less than 2 days old (Section 4.2.27).

If the Loosing CSP is not satisfied they send back a ECA Reject Advice listing the reason for rejection within 15 minutes (Section 4.2.32).

If all looks good, the Loosing Carrier sends the Gaining CSP back a ECA Confirmation Advice within 15 minutes (Section 4.2.33).

Now is when the magic happens – the Loosing CSP “ports out” that number via their internal process, for this they provide temporary Donor Transit Routing – Essentially redirecting any calls that come into the ported number to the new carrier.

Finally the Loosing CSP sends a Electronic Completion Advice (ECA) to confirm they’ve processed the port out from their network (Section 4.2.34).

Within a day of the port completing, the Losing CSP updates the Ported Local Number Registry (PLNR) to show the service has been ported out and the identifier of the gaining carrier the number has been ported to. PLNR is nothing more than a giant text file containing a list of all the numbers originally allocated to the Loosing CSP and the carrier code they should now be routing to, this data is published so the other CSPs can read it.

Other CSPs read this PLNR data and update their routing tables, meaning the calls will route directly to the new Gaining CSP, and the Donor Routing can be removed on the Losing CSPs switch.

Cat C – Complex Porting – Process

Summary

Cat C ports are a manually project managed, and unlike Cat A are not automated.

This means that the Loosing and Gaining CSP must both allocate a “project manager”, the two to liaise with each other (typically via email) to confirm the numbers can be ported and then find a suitable time to port the numbers, finally at the agreed upon date & time each side kicks off their own process to move the numbers and confirm when it’s done.

Porting Number Validation – PNV

Before a Cat C port can be initiated the PNV process is typically called upon to validate the port won’t get rejected. This isn’t mandatory but is often used as PNV is processed relatively quickly which means any issues with the services can be worked out prior to submitting the port request.

The submitted PNV request is very similar to the actual Cat C porting request (CNA), containing the customer’s details and list of services to be ported.

The loosing CSP returns the list of numbers each with a response code denoting particulars of the service, and if rejected, a rejection code.

Response Codes:

Reason Code	Reason
P	Prime/Directory Service Number
A	Associated Service Numbers
S	Standalone Number
R	Reserved Number
D	Exchange based diversion
SS	Secondary Service linked to this Number (e.g. DSL)

Reject Codes:

Code	Reason
1	Invalid Customer Authorization date	Whole Request
2	Insufficient information supplied	Whole Request
3	Telephone Number appears to belong to a completely different end customer	Per Number
4	Telephone Numbers relate to cancelled services or services pending cancellation	Per Number
5	Missing / invalid PNV Sequence Number	Per Number
6	Telephone Numbers in the PNV request relate to services which are billed by a service provider other than the Losing Carrier.	Per Number
7	Telephone Numbers are not found / not present on Losing Carrier’s Network	Per Number

(Section 4.3.8)

It’s worth noting the main reason PNV is used so heavily in Cat C ports is if a batch of numbers / services are requested to be ported in a single Cat C porting request, if any one of those numbers gets rejected the whole port will need to be resubmitted, hence it being important that before submitting the numbers to be ported, the Gaining CSP verifies they can be ported via the PNV process.

The PNV does not guarantee a physical audit of the services, but rather an audit of available electronic data by the loosing CSP. It’s also only valid for the day of issue, so services can change between a PNV coming back clear and the port request being rejected.

99% of PNV requests should be processed within 5 business days. (Section 4.3.9)

Step 1 – Complex Notification Advice (CNA)

To initiate the port the gaining CSP submits a Complex Notification Advice (CNA) to the loosing CSP.

This contains all the data you’d expect, including customer’s details and the list of services/numbers to be ported, along with a batch number that’s unique to the Gaining CSP (Like a ticket / request number) and Gaining CSP’s Project Manager – The staff member as the Gaining CSP that will be responsible for the port.

Upon receipt, the Loosing CSP sends back a CNA Receipt Advice to confirm they’ve received and begins validating the CNA in a process very similar to the PNV process. (Section 4.4.1)

Step 2 – CNA Confirmation Advice

If verification fails and the CNA request is deemed not valid the CNA is rejected by the Loosing CSP, who sends back a CNA Reject Advice response. This response will contain a list of services and the reject code for each rejected service as per the PNV process.

If the CNA is deemed valid, the Loosing CSP responds with a CNA Confirmation Advice message, containing the Loosing CSP’s project manager for this port, along with the Gaining CSP’s batch number to the Gaining CSP.

This is sent in a batch file along with other CNA Confirmation Advice messages within 5 days. (Section 4.4.6)

Step 3 – Complex Cutover Advice (CCA)

Once the Gaining CSP has the CNA Confirmation Advice the project manager for the port at the Gaining CSP contacts the nominated project manager at the Loosing CSP and the two have to agree on a cutover date and time for the port. (Section 4.4.8)

The agreed date and time of the port is sent by the Gaining CSP to the Loosing CSP in the from of a Complex Cutover Advice (CCA) containing the Gaining CSP batch number and agreed date & time. (Section 4.4.27)

If the details of the CCA are valid from the Loosing CSP’s perspective, the Loosing CSP sends back CCA Confirmation Advice to confirm receipt.

Step 4 – The Porting

At the agreed upon date & time both CSPs are to execute the port from their organization’s perspective.

Typically the loosing CSP provides Donor Transit Routing forwarding / redirecting calls to the ported out number to the new CSP.

There is no completion advice and no verification the port has been completed successfully required by the code. (Section 4.4.48)

Within a day of the port completing, the Losing CSP updates the Ported Local Number Registry (PLNR).

Other CSPs read this PLNR data and update their routing tables, meaning the calls will route directly to the new Gaining CSP, and the Donor Routing can be removed on the Losing CSPs switch.

If you’ve made it this far I’m amazed. I’ve written two more posts on LNP that are relvant to this one, one with an FAQ on number porting, and another with info on how call routing in LNP works.